Quantum DXi4701, User Manual

Page: 173 / 440

Chapter 6: DXi4701 Replication
Receive VTL
Quantum DXi4701 User’s Guide 147
Note: Before you can receive replicated partitions, you must specify
one or more replication sources (see Adding a Replication
Source on page 258).
To access the Receive VTL page, click the Replication menu, and then
click the Receive > VTL tab.
Use the Receive VTL page to perform the following tasks:
• View received snapshots and recover, failback, or delete snapshots
(see Received Snapshots on page 147).
• Manage recovery jobs (see Recovery Jobs on page 154).
• Manage failback jobs (see Failback Jobs on page 155).
• Manage partitions configured for Cartridge Based Replication (see
Cartridge Based on page 156).
Received Snapshots
The Received Snapshots page allows you to view and work with
received snapshots. When a replicated VTL partition is received from a
source system, it is saved as a snapshot. The snapshot contains all of the
data necessary to fully recover or failback the partition to the point in
time when the snapshot was saved.
To access the
Received Snapshots page, on the Receive VTL page, click
the Received Snapshots tab (see Figure 80 ).