Quantum DXi4701 User Manual Download Page 154

Page: 154 / 440

Chapter 6: DXi4701 Replication
Replication Send

128

Quantum DXi4701 User’s Guide

share or partition on the source system with the share or partition on

the target systems that will received the replicated data. The

Sync ID

for

the source share or partition must match the

Sync ID

for the target

share or partition.
If Cartridge Based Replication is enabled for a VTL partition, the

following media behaviors apply:

• When a cartridge is exported from the partition, the cartridge is

deleted from the configured target systems.

• When a cartridge is imported into the partition, the cartridge is

replicated to the configured target systems.

• When a cartridge is deleted on a source system, it is in the

Unassigned

partition, thus this action has no effect on Cartridge

Based Replication activity.

To configure a source share or partition for Directory/File or Cartridge

Based Replication:

If you have not already done so, configure the target share or

partition on the target DXi (see

Configuring a Target Share for

Directory/File Based Replication

on page 144 or

Configuring a Target

Partition for Cartridge Based Replication

on page 158.)

On the source DXi, select the source share or partition and click

Configure

The

Share or Partition Configure

window displays (see

Figure 69

Figure 69 Share or Partition
Configure Window

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands