Quantum DXi4701, User Manual

Page: 184 / 440

Chapter 6: DXi4701 Replication
Receive VTL
158 Quantum DXi4701 User’s Guide
The Partitions Eligible for Replication section displays the following
information:
• Partition Name - The name of the partition.
• State - The state of Cartridge Based Replication for the partition
( Enabled or Disabled ).
• Sync ID - The Sync ID used to identify the source partition that
will send replicated data to the partition.
• Access - The selected access option for the partition ( Locked or
Unlocked ).
Note: Click the Information button [i] next to a partition to display
detailed information about the partition and recent replication
activity.
Configuring a Target Partition for Cartridge Based Replication
Configuring a VTL partition for Cartridge Based Replication enables the
automatic replication of cartridges on the source partition to the target
partition. Before you configure a partition on the source system for
Cartridge Based Replication, you must configure a partition on the
target system to receive the replicated data from the source partition.
Note: For information about configuring Cartridge Based Replication
on the source system, see Configuring Directory/File or
Cartridge Based Replication on page 127.
To configure a target partition for Cartridge Based Replication:
1
Select the partition and click
Edit
.
The
Edit Partition Settings
page displays (see Figure 86 ).