Chapter 4: Configuration Wizards
Email Alerts Wizard
Quantum DXi4700 User’s Guide
102
Note:
To use hostname format, you must specify at least one DNS IP address on the
Network
).
2. In the
From Email Address
box, enter the return e-mail address displayed in e-mails sent by the
DXi4700.
3. Specify a return address that lets you easily identify the system that generated the e-mail (for example,
). The return address must contain an @ symbol and a valid domain
name, including a period.
4. (Optional) Select the
Enable Admin Alerts about Email Server not configured
check box to have
system generate administration alerts to notify you if an e-mail server is not configured.
5. (Recommended) Select the
Enable automatic emails to Quantum
check box to periodically send
system configuration and status information to Quantum, including any software upgrades you have
installed using the
Software Upgrade Utility
. Quantum Support can use this information to provide a
better support experience in the future.
Note:
Automatic e-mails contain configuration and status information only, and do not contain any
customer data stored on the system.
6. Click
Next
to continue.
Figure 69:
Email Alerts Wizard: Server
Step 3: Recipients
1. Click
Add
to add an e-mail recipient.
2. Under
Add Email Recipient
, enter information about the recipient (see
):
