![background image](http://html1.mh-extra.com/html/quantum/dxi4700/dxi4700_upgrade-manual_3526778014.webp)
Installing Components in the Node
Quantum DXi4700 Capacity Upgrade Guide
14
).
Figure 7:
Expansion Module Power Switches - DXi4700
1 - Power Switches
Installing Components in the Node
Depending on the upgrade, you may need to install additional components in the DXi4700 Node (see
Capacity Upgrade Overview on page 7
). To install the additional Node components, see the following
sections:
l
Installing the Node Hard Drives below
l
Opening the Node Cover on page 17
l
Installing the Memory Modules on page 25
l
Installing the H810/H830 RAID Controller on page 30
l
Closing the Node Cover on page 33
Installing the Node Hard Drives
The Node has a total of 12 hard drive slots. For all configurations, 6 hard drives (4 TB each) are pre-installed
in hard drive slots 0–5.
If required for the upgrade, remove the hard drive blanks from slots 6–11 and install 6 hard drives (4 TB
each) in the Node. The additional hard drives must be installed in hard drive slots 6–11 (see
).
Caution:
Do not remove the hard drives pre-installed in hard drive slots 0–5. If these drives are
removed for any reason, you must re-install them in their original positions.