Installing Components in the DXi4700 Node
Quantum DXi4700 Installation Guide
21
a. On the drive carrier, press the release button to extend the handle (see
).
Figure 9:
Installing a Node Hard Drive
1
2
3
Item
Description
1
Hard drive carrier
2
Hard drive handle
3
Release button
b. Insert the drive carrier into the drive slot and push it in all the way.
c. Close the drive carrier handle to lock the drive in place.
Opening the Node Cover
To open the DXi4700 Node cover:
WARNING:
The DXi4700 G1 Node and Expansion module (JBOD) weigh 61.0 pounds (27.7 kg) and
62.6 pounds (28.4 kg) respectively. A minimum of two people are required to lift either chassis.
WARNING:
The DXi4700 G2 Node and Expansion module (JBOD) weigh 49.4 pounds (22.4 kg) and
59.2 pounds (26.8 kg) respectively. A minimum of two people are required to lift either chassis.
1. Set the Node on a flat, stable surface.
2. Make sure that no cables (power, Ethernet, Fibre Channel, or SAS) are connected to the Node.
3. Press and hold the power button on the front of the Node for three seconds to fully drain the system of
stored power prior to removing the cover (see
).