manualshive.com logo in svg

Quantum DXi4510, User Manual

Share
Download
Quantum DXi4510 User Manual Download Page 269

Chapter 10: DXi4000 Utilities

Software Upgrade

Quantum DXi4000 User’s Guide

245

• All outstanding administration alerts are deleted (see 

Admin 

Alerts

 on page 127).

• Healthchecks complete successfully without errors (see 

Healthchecks

 on page 227).

3

In the 

Software Image File

 box, type the location and filename of 

the new software image file.
Or click the 

Browse

 button to browse the system and locate the 

new software image. The software image file must end with the 

.fw

 

extension.

4

Click 

Upload

.

A 

Warning

 message displays.

5

Click 

Start

 to begin the upload process.

Do not close the window until the upload process is complete. An 

Information

 message displays stating the software image was 

uploaded successfully.

6

Click 

OK

.

The 

Activate/Remove Software Image

 message displays (see 

Figure 139

).

Figure 139  Activate/Remove 
Software Image

7

If you are upgrading from software version 1.4.x, insert the DXi 

2.0.x Software DVD into the DVD drive on the node.

Summary of Contents for DXi4510





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands