manualshive.com logo in svg

Quantum DXi4510, User Manual

Share
Download
Quantum DXi4510 User Manual Download Page 151

Quantum DXi4000 User’s Guide

127

Chapter 8

DXi4000 Alerts

The 

Alerts

 page allows you to view and work with administration alerts 

and service tickets. The DXi4000 generates administration alerts and 

service tickets when a hardware or software event occurs.
To access the 

Alerts

 page, click the 

Alerts

 menu.

The 

Alerts

 page contains the following tabs:

•

Admin Alerts

•

Service Tickets

Admin Alerts

The 

Admin Alerts

 page allows you to view and work with 

administration alerts. The DXi4000 generates an administration alert 

when the condition of the system has changed, such as going from the 

offline state to the online state.

Note:

In addition to viewing administration alerts on the 

Admin 

Alerts

 page, you can configure the system to send alerts to an 

e-mail address (see 

Recipients

 on page 200).

Summary of Contents for DXi4510





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands