Quantum DXi4510, User Manual

Page: 243 / 292

Chapter 9: DXi4000 Configuration
Notifications
Quantum DXi4000 User’s Guide 219
6 Click Apply .
Deleting a Community
Delete an SNMP community if you no longer want the DXi4000 to
belong to a group of devices that are monitored by a common
management station.
To delete a community, select the community and click
Delete .
Note: You can select multiple communities to delete at once.
Test
The SNMP Test page allows you to send a test SNMP trap to verify that
SNMP is correctly configured on the DXi4000.
To access the
SNMP Test page, on the SNMP page, click the Test tab
(see Figure 120 ).
Figure 120 SNMP Test Page
To send a test SNMP trap, select a destination in the list and click Send .
If the destination does not receive the SNMP trap, make sure that the
destination IP address is correct (see Editing a Destination on page 212).
Also make sure that the community information is correct (see
Community on page 214).