Quantum DXi4510, User Manual

Page: 190 / 292

Chapter 9: DXi4000 Configuration
OST
166 Quantum DXi4000 User’s Guide
Note: If you deleted the storage server from Symantec NetBackup or
Symantec Backup Exec, you must wait several minutes before
deleting the storage server from the DXi4000.
To delete a storage server:
1 Select the storage server in the Storage Server List .
You cannot delete a storage server if it has more than zero currently
active connections. The number of active connections is displayed
on the OST page (see Storage Server List on page 161). Also, you
cannot delete a storage server if it contains LSUs. Before deleting
the storage server, you must first delete any LSUs it contains (see
Deleting an LSU on page 170).
Note: You can select multiple storage servers to delete at once.
2 Click Delete .
LSU
The LSU page allows you to manage the logical storage units (LSUs)
contained on OST storage servers on the DXi4000. You can view
information about existing LSUs, add or edit LSUs, and delete LSUs.
Note: When using OST with network segmentation, I/O must be
performed on the OST IP address,
not
the management or
replication IP address (see Network on page 176).
To access the LSU page, on the OST page, click the LSU tab (see
Figure 93 ).