The device files created are for an installed DLT device with a SCSI ID of 4 and are shown below along
with their corresponding operating characteristics:
1m - drive 1, rewind on close
1mn - d
rive 1, no rewind on close
1c - drive 1, compressed, rewind on close
1cn - drive 1, compressed, no rewind on close
Associating the device files to a DLT device with a SCSI ID other than
4
requires that the number "4" in the minor number of the
mknod
command be changed to the new ID.
DLT Mini-Library Usage
The HP-UX operating system does not support SCSI-2 media changer device commands. Therefore, an
installed DLT7 mini-library can not be utilized in random access mode and can only be accessed in
sequential mode. Refer to the DLT1/DLT7 Install and Operations Guide
for detailed description of these
access modes.
