background image

6464181-01 Rev B

September 2004

11

Installing a DLTtape or Super DLTtape Drive into an AIX System

5.

Tape Cartridge Compatibility

Table 4

 and 

Table 5

 provide information about tape cartridge and tape drive compatibility. 

Use this matrix when determining which tape cartridges to use in your tape drive.

Note:

The SDLT 220 and SDLT 320 tape drives can read, but not append 
data to, DLTtape IV cartridges that were previously written by a 
DLT 4000, DLT 7000, or DLT 8000 tape drive. The SDLT 600 tape 
drive can read, but not append data to, Super DLTtape I and DLTtape 
VS1 cartridges.   

Table 4.

Tape Cartridge and Tape Drive Compatibility (Native/Compressed) – DLT

Drive Type

Tape Cartridge

DLT 2000
DLT 2500
DLT 2700

DLT 2000XT
DLT 2500XT
DLT 2700XT

DLT 4000
DLT 4500
DLT 4700

DLT

7000

DLT

8000

DLTtape™ III
(CompacTape III™)

10/20 GB

10/20 GB

10/20 GB

10/20 GB

10/20 GB

DLTtape™ IIIXT 
(CompacTape IIIXT)

15/30 GB

15/30 GB

15/30 GB

15/30 GB

DLTtape™ IV 
(CompacTape IV™)

20/40 GB

20/40 GB 
35/70 GB

20/40 GB 
35/70 GB 
40/80 GB

CleaningTape III

20 uses

20 uses

20 uses

20 uses

Summary of Contents for DLTtape DLT 4000













Reviews: