Registering Your Tape Drive
11
DAT 320
2
Turn on the computer.
3
If necessary install the DAT320 O/S driver.
4
Install your backup software program. The documentation that came with your
software should describe this procedure.
5
Gently insert a tape cartridge into the tabletop tape drive’s slot. Slide the cartridge
into the slot until the drive accepts the cartridge and loads it. A brief delay occurs
while the drive identifies the cartridge type and state, and moves the tape to the
data area. Then the green Ready LED goes ON.
6
Use your backup software application to perform a sample backup-and-verify
operation. The green Ready LED flashes as data is written to and/or read from the
tape.
7
At the end of the operation, press the
Eject
button on the front of the tabletop tape
drive to eject the cartridge from the drive.
Registering Your Tape Drive
After you install the tape drive, be sure to register it. Registering your drive ensures that
you will receive the latest information about your drive, as well as other product, service,
and support information. For your convenience, you can register your drive through our
Web site.
• Please visit
to register your product.
Safety Compliances
The DAT 320 Tape Drives are safety compliant with the following regulatory
organizations and codes in the countries indicated:
Country
Regulatory Organization
Compliant to:
US / CANADA
Underwriters Laboratories UL
or Canadian Standards
Association CSA
UL/CSA 60950-01,
2nd Ed.
EU member nations
Comité Europèen de
Normalisation
Electrotechnique – the
European Committee for
Electrotechnical
Standardization (CENELEC)
EN 60950-1
:2006+A11:2009
