ActiveScale™ P100E3 Support Guide
13
• If the status is
Degraded
, the drive has displayed problematic behavior and will undergo
automatic repair. If the problematic behavior continues, the drive will be decommissioned.
Important:
Do not remove a drive in the
Degraded
state. If the drive returns to
the
Online
state, the automatic repairs were successful and no further action is
required.
• If the status is
Decommissioning
, the drive is either undergoing automatic repair, or is being
prepared for safe removal from the system. When it is safe to remove the drive, the state will
change to
Decommissioned
.
Important:
Do not remove drives in the
Decommissioning
state. If the drive
never reaches the
Decommissioned
state, contact Quantum Corporation support.
• If the status is
Decommissioned
, proceed with physical drive replacement.
e. Click the
Ident
button to light the front identification LED on the drive.
f. Identify the physical location of the drive.
2. Remove the drive tray.
a. Locate the release lever under the drive tray handle at the front of the P100E3 node.
Figure 3
-
3. Drive tray release lever
b. Press upward on the release lever and use the handle to pull the tray out of the P100E3 node with
even pressure.
Figure 3
-
4. Drive tray pulled out