Command List
The following table summarizes all the commands:
Sets the key click volume level.
0 - 9
VOLUME
Sets the character used as a decimal point on the display.
0 = , (comma)
1 = . (period)
Fmark,
Enables/Disables the RS232 echo. The result string is
always sent back.
0 = Disable
1 = Enable
ECHO
Resets shot counter. SHOT ? will return the number of
shots.
0 = Reset to zero
SHOTS
Store a configuration.
1 - 12
STORE
Recall a stored configuration.
0 - 12
RECALL
Enable / disables the pulse generator output.
0 = Disable
1 = Enable
RUN
Beeps the speaker inside the 9700 the specified number
of times.
1 - 1000
BEEP
Sets the delay, in microseconds*10, for Channel 2
0 - 999999998
T2:Dly
Sets the pulse width, in microseconds*10, for Channel 2
100 - 100000
T2:Wid
Sets the current level, in 10's of mA (100 = 1A), for
Channel 2
0 - 2500
T2:Iamp
Enable/disable Channel 2
0 = Disable
1 = Enable
T2:Ena
Sets the delay, in microseconds*10, for Channel 1.
0 - 999999998
T1:Dly
Sets the pulse width, in microseconds*10, for Channel 1.
100 - 100000
T1:Wid
Sets the current level, in 10's of mA (100 = 1A), for
Channel 1
0 - 2500
T1:Iamp
Enable/disable Channel 1
0 = Disable
1 = Enable
T1:Ena
Sets the active edge of the Ext/Gate signal when used as
an external trigger.
0 = falling edge
1 = rising edge
TRIG
Sets the pulse generator mode.
0 = Single Shot mode
1 = External Trigger mode
MODE
Description
Parameters
Command Name
9700 Communication Commands
18