Connecting Cables to MHO-140
Quantum Maestro Getting Started Guide | 60
Explanations
Item
Description
1
SmartConsole Client for the Check PointManagement Server (
2
).
2
Check Point Management Server.
3
Layer 2 switch.
4
A DAC cable or Fiber cable (with transceivers) connected to the Management port 1.
Note - You assign this Management port to the applicable Security Groups.
Shared Management feature allows to assign the same Management port
(interface
eth
X
-Mgmt
Y
) on a Quantum Maestro Orchestrator to different
Security Groups. The assigned Management port has a different IP address and
a different MAC address in each Security Group, to which this port is assigned.
5
Client you can use to configure the Gaia Operating System on the Security Appliances in
Security Groups, which you manage through Port 1 with the Management Server (
2
).
You connect:
n
Over SSH to the command line (Gaia Clish) of a Security Group.
n
With a web browser to the Gaia Portal of a Security Group.
6
The first Quantum Maestro Orchestrator.
