Connecting Cables to Quantum Maestro Orchestrators
Quantum Maestro Getting Started Guide | 41
Connecting Cables to Quantum
Maestro Orchestrators
This section describes how to connect cables to Quantum Maestro Orchestrators.
It is possible to deploy Quantum Maestro Orchestrators in these ways:
n
On a single site (see
).
n
On two different sites (see
).
It possible to use breakout cables to split the supported 100 / 40 GbE port into four 10 GbE ports (see
"Splitting the Ports with Breakout Cables" below
).
Splitting the Ports with Breakout Cables
In This Section:
Breakout Cables
Quantum Maestro Orchestrators have 100 / 40 GbE ports.
With a breakout cable, it is possible to split the supported 100 / 40 GbE port into four 10 GbE ports.
Insert the splitter cables to convert each applicable QSFP28 100 GbE port into four SFP28 10 GbE ports.
Important - The breakout cable that splits 100 GbE port into four 25 GbE ports is not supported.
Example of a breakout cable:
