UP
H
E
B/C
5
F
G
D
3
A
x2
STEP 4
Remove office plug and
install storage box.
Firstly, install the storage box on the
axle, then press it down slightly.
First attach the thumb
screw (A) to the
threaded hole of the
plug and then pull it
together.
Control Panel
After connecting the product's power plug to an external power source, raise the product to the
appropriate height with the control panel. Then remove the four holes on the front panel by
hand-tightening the screws (A). Remove the storage box from the package and secure it to the
left and right sides of the product through the reserved hanging shaft as shown.
STEP 5
Install
TV bracket
Attention:
If you do not need to install the TV, please
ignore next steps.
Use a screwdriver to attach the screws(D), washers(G), spacers(H) and TV
bracket to the threaded holes on the front panel of the product. Use the
magnetic level(F) to calibrate whether the TV bracket is installed level.
Screwdriver
STEP 6
Connect the TV to the
TV bracket arms
Used for M8 screw
Television
Used for M6 screw
Use a screwdriver to attach the screws(B) or screws(C), rectangular washer(E), TV
bracket arms and spacers(H) to the TV
Rectangular washer(E)
Television
Connecting cables
STEP 7
Insert the power cord of the TV into the threading sleeve
Hanging the TV
STEP 8
Install the TV on the
TV bracket
and tighten the screws with a screwdriver,
then plug the TV's power cord into the power strip inside the product.
Power outlet
(located on the inside
of the product)
Screw
Power cord
Threading sleeve
Common fault treatment
The following tips will help you detect and fi x common errors made when using the product. If you need further assistance, please contact your supplier.
Fault phenomenon
Method
No response after pressing the
down arrow while connected to a
power supply for a long period of
time.
1.Check if all the cables are connected fi rmly
1.Check if all the cables are connected fi rmly
2.Contact your supplier or dealer
2.Contact your supplier or dealer
No response while pressing up
arrow/ down arrow after
connected with a power supply
Rises in a low speed
1
.
Check if overloaded, max loading:
90kg;
1
.
Check if overloaded, max loading: 90kg;
1
.
Check if overloaded, max loading: 90kg;
2
.
Contact your supplier or dealer
2
.
Contact your supplier or dealer
2
.
Contact your supplier or dealer
The motor does not move as instructed
1. Contact your supplier or dealer
1.Reposition
2.Contact your supplier or dealer
Goes down but not up
Slides downwards
Frequently re-positions
Overwork
（
Duty cycle
:
Max 2min on/18min OFF
）
1
.
Restart after suspend for 18mins while
connecting with power;
2
.
Contact your supplier or dealer;
D
x4
G
x4
x4
H
x4
Magnetic
Level
Magnetic Level
D
4
G
H
B
x4
C
x4
E
x4
H
x4
