17
“Movement is life!”
Figure 16: Hip Angle Adjustment Lever
in unlocked position
VI. OPERATING INSTRUCTIONS
Figure 15: Hip Angle Positions
A. HIP ANGLE ADJUSTMENT
1. Verify that the chair is locked in the non-ACTIVE state. See the operating
instructions for the ACTIVE Handle in part G of this section.
2. While supporting the child’s weight, lift up on the hip angle adjustment lever.
3. Move the back of the chair to the desired position and release the lever.
4. Verify that the positioning pins have engaged fully into the recline holes on
both sides of seat base (
Fig.18
).
B. FOLDING THE SEAT BACK
1. Lift up on the hip angle adjustment lever as shown in
Fig. 16
.
2. Fold the back forward then release the lever.
3. To unfold, reverse the above steps.
Figure 17: Hip Angle Adjustment
Lever in locked position
Figure 18: Recline lock pin
engaged in recline
hole
WARNING: Always inspect your chair before placing your child into it. Look for
loose parts, sharp edges, hot surfaces, detached harnesses, mechanisms that are not
fully engaged, and any other hazards. Always engage the wheel locks before per-
forming a transfer of the child to or from the chair. Read this instruction manual
before using this chair.
WARNING: Upon release of the lever, verify that lever
returns to the down (locked) position. This indicates
safe engagement.
