background image

Quantum 600E

   www.quantumrehab.com

43

I X .   W A R R A N T Y

LIFETIME LIMITED WARRANTY

For the lifetime of your power chair from the date of purchase, Pride will repair or replace at our option to the original
purchaser, free of charge, any of the following parts found upon examination by an authorized representative of Pride to be
defective in material and/or workmanship:

Structural frame components, including:

!

Main Frame

Fixed-position seat post

TWO-YEAR LIMITED WARRANTY

For two (2) years from the date of purchase, Pride will repair or replace at our option to the original purchaser, free of
charge, any of the following parts found upon examination by an authorized representative of Pride to be defective in
material and/or workmanship:

Electronic components, including:

Main frame assemblies, including:

!

Charger Assembly

Anti-tip forks

Caster forks

!

Controller

Caster beam

Metal seat framing

!

Joystick

Other components, including:

!

Foot riggings

Electrical Harness

Foot rigging mounting brackets

18-MONTH LIMITED WARRANTY

For eighteen (18) months from the date of purchase, Pride will repair or replace at our option to the original purchaser, free
of charge, any of the following parts found upon examination by an authorized representative of Pride to be defective in
material and/or workmanship:

!

Motor/gearbox assembly

Power seat actuator

ONE-YEAR LIMITED WARRANTY

For one (1) year from the date of purchase, Pride will repair or replace at our option to the original purchaser, free of
charge, any of the following parts found upon examination by an authorized representative of Pride to be defective in
material and/or workmanship:

!

Accessories

Brakes (electronic function ONLY)

SIX-MONTH LIMITED WARRANTY

For six (6) months from the date of purchase, Pride will repair or replace at our option to the original purchaser, free of
charge, any of the following parts found upon examination by an authorized representative of Pride to be defective in
material and/or workmanship:

!

Bearings and bushings

Plastic components, except body

The battery is covered by a separate six-month warranty, provided by the battery manufacturer.   The batteries are not
warranted by Pride.

Summary of Contents for 600E
















































Reviews: