22
www.quantumrehab.com
Quantum 6000 XL
I V . A S S E M B L Y
Seat Installation
It may be necessary to install the seat either prior to initial operation or after transporting your power chair. High-back seats
are attached to the power base with the Universal Mounting System (UMS). The UMS consists of universal parts that may
be attached to the seat, regardless of seat width or seat depth. The two main components are aluminum extrusions mounted
to the seat base. These extrusions attach to a pair of trapeze bars that are mounted to the power base. See figure 11. If
your power chair is equipped with a Synergy Seat or a Synergy TRU-Balance Power Tilt, refer to the information provided
in separate manuals.
WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may lose
control of the seat if they do so, resulting in personal injury or damage to the chair.
Figure 11. Universal Mounting System
SEAT
LATCH
SAFETY
REAR
EXTRUSION
FRONT
EXTRUSION
TRAPEZE
BARS
