background image

Manual for SynactiX 5EP/5EI

Installation Instructions

Parallel Port, Serial Port Connectors (UART1, UART2)

The parallel port connector can be connected to a parallel device such as a printer. The serial
port UART1,2 connectors can be connected to a serial port device such as a serial port
mouse. You can enable/disable them and choose the IRQ or I/O address in “Integrated Periph-
erals” from AWARD  BIOS  SETUP.

Line-in jack, Microphone-in jack, Speaker-out jack and MIDI/Joystick

Connector (SynactiX 5EP-A/-AL, SynactiX 5EI-A/-AL available)

The Line-in jack can be connected to devices such as a cassette or minidisc player to
playback or record. The Microphone-in jack can be connected to a microphone for voice input.
The Speaker-out jack allows you to connect speakers or headphones for audio output from
the internal amplifier.The MIDI/Joystick connector allows you to connect a game joystick or a
MIDI device.

USB3, 4 Connectors

Two USB ports are not available on the back panel. Therefore, we provide a 10-pin cable
(optional)  to connect on-board USB header and USB devices.

MIDI/Joystick

Speaker out

Line in

Microphone in

Optional

Parallel Port

UART1

UART2

+ 5 V

D1+

  D1-

GND
GND

GND
GND

 D0+
 D0-
 +5V

Summary of Contents for SynactiX 5EP














































































Reviews: