Manual for KinetiZ 7L
ATX Power Supply Connector & Power Switch (POWER SW)
Be sure to connect the power supply plug to this connector in its proper orientation. The
power switch (POWER SW) should be connected to a momentary switch (power button).
When powering up your system, first turn on the mechanical switch of the power supply (if
one is provided), then push once the power button. When powering off the system, you
neednt turn off the mechanical switch, just
Push once
*
the power button.
Note: * If you change soft-off by PWRBTN from default Instant-off to Delay 4
Secs in the POWER MANAGEMENT SETUP section of the BIOS, the power button
should be pressed for more than 4 seconds before the system powers down.
Line-in jack, Microphone-in jack, Speaker-out jack and MIDI/Joystick
connector
The Line-in jack can be connected to devices such as a cassette or minidisc player to
playback or record. The Microphone-in jack can be connected to a microphone for voice input.
The Speaker-out jack allows you to connect speakers or headphones for audio output from
the internal amplifier.The MIDI/Joystick connector allows you to connect a game joystick or a
MIDI device.
POWER
S W
POWER
S W
POWER
S W
ATX Power Supply Connector
5V 5 V
-5V
GND
GND
PSON
-12V
3.3V
GND
12V
5VSB
5V
GND
3.3V
GND
5V
GND
PS-OK
3.3V
GND
chapter 2
Line in(or Rear out ) jact
MIDI/Joystick
Speaker out
Microphone in