980 HDMI Protocol Analyzer Application Guide
– Source Compliance Test Automation
Rev. A1
Page 10
Feb 14, 2013
DHCP server. These procedures assume that you have powered up the 980/980B and that the embedded 980 GUI
Manager has been launched and established a physical Ethernet connections have been made.
To set the IP address of the 980/980B through the embedded 980 GUI Manager:
1. Access the
Instrument Settings
dialog box by touch selecting the
Instrument
pull-down menu. Then select
Configure
.
2. Alternatively, access the
Instrument Settings
dialog box from the Main window by touch selecting the pop-up
menu icon on the lower left corner of the 980 built-in display and select
Configure Network.
The following dialog box appears:
