Quantum Data 881 User Manual Download Page 152

Page: 152 / 1144

140

Chapter 4

Networking 882s

Upgrading 882s over a network

An upgrade to a network of 882s can involve a new system and firmware file (“vxWorks”),

a new gateware file, and new library resource files. In some cases you may be upgrading

only the firmware or only the gateware, but not both. In other cases, the upgrade may

involve only new images or formats. The procedures you follow for an upgrade will

therefore depend on what you are upgrading.

This section provides procedures for upgrading 882s over a LAN. The procedures for

upgrading a single 882 that is not connected to a LAN are provided in “

Upgrading the

generator locally

” on page 97.

Upgrade options and procedures

The recommended procedure for upgrading is to upgrade the file server and the flash

memory of each 882. Upgrading the PC card is optional, depending on how your site uses

the PC card. For example, you may decide to leave the current files on the PC card so you

can return to a known operational state should the upgrade fail.

To begin an upgrade, you must either have a CD-ROM containing the new files, or

download the files from the Quantum Data Web site. You will copy the new files to your file

server PC which must be connected to the LAN through the Ethernet cable.

Overview of upgrade procedures

The following are the high-level steps for performing a complete upgrade (system and

firmware file, gateware, and library resource files) to 882s over a network. Detailed

instructions for each step are provided in the sections that follow.

1. Back up the current file server system and firmware file, gateware, and library files.

2. Copy the new 882 system and firmware file, gateware, and resource files onto the file

server PC.

3. Remove the system and firmware file, gateware, and library resource files from each

882’s flash memory.

4. Copy the new system and firmware file, gateware, and library resource files from the

file server PC to each 882’s flash memory.

5. Reboot all 882s.

Backing up the current files on the file server

Backing up the current files ensures that you can return to a known operational state

should the upgrade fail.

Summary of Contents for 881

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 881

Reviews:

Related manuals for 881

Brands by name

Popular brands

Quantum Data 881, User Manual

Search results

Summary of Contents for 881

Reviews:

Related manuals for 881

Brands by name

Popular brands