Quantum Data 780B, User Manual

Page: 80 / 224

780B Video Generator/Analyzer
– User Guide
Page 79
December 1, 2014 Revision A7
5.4 Multi-protocol (HDCP, EDID and CEC) testing on an HDMI HDTV
This section provides procedures for testing HDCP, EDID and CEC using the Aux Combo Test image. The Aux
Combo Test image runs tests similar to the individual HDCP, EDID and CEC tests except that the results are
displayed on the HDTV that the 780B HDMI output is connected to.
5.4.1 Configurations for running multi-protocol tests on an HDMI Sink Device
You run this test with the 780B HDMI OUT port connected directly to an HDTV input
This configuration is shown below:
5.4.2 Procedures for running multi-protocol tests on an HDMI Sink Device
Use the procedures below to run a multi-protocol test on an HDMI sink.
1. Make the physical connections between the 780B HDMI OUT connector and the display device under test.
2. Enable the HDMI output using the procedures at Selecting a Signal Type and Resolution .
3. Touch select video pattern status and activation button on the lower right of the LCD interface.