Installing internal tape drives
Reviewing Drive Default Settings
20
FIGURE 3.
Internal Tape Drive Jumper Settings
TABLE 2.
Internal Tape Drive Default Settings
Parameter
Default Setting
Jumper Pins/Switches
See...
SCSI ID
6
Jumper pins 1–2, 3–4, 5–6, 7–8 page 21
Parity checking
Enabled
Jumper pins 9–10
Terminator power
Disabled
Jumper pins 11–12
Data compression
Enabled
Switches 1 and 2
Media Recognition System checking
(DDS-4 drives only)
Enabled
Switch 3
Power-On Self-Test diagnostic
Enabled
Switch 4
Host operating system
Microsoft Windows
98/Me/XP/NT/
2000/2003 Server
Switches 5 through 8
SCSI interface compatibility
(DDS-4 drives only)
Wide SCSI (LVD
and single ended)
Switch 9
Vendor ID
SEAGATE DAT
Switch 10
SCSI ID=0
SCSI ID=1
SCSI ID=2
SCSI ID=3
SCSI ID=4
SCSI ID=5
SCSI ID=6
SCSI ID=7
SCSI ID=8
SCSI ID=9
SCSI ID=10
SCSI ID=11
SCSI ID=12
SCSI ID=13
SCSI ID=14
SCSI ID=15
Parity enable
Term. power
Default jumper settings shown
(SCSI ID 6, parity checking enabled,
and termination power disabled)
Pins:
Function:
1-2
SCSI ID bit 0
3-4
SCSI ID bit 1
5-6
SCSI ID bit 2
7-8
SCSI ID bit 3
9-10
Parity checking
11-12
Termination Power