- 29 -
f) Then the device offers to set the time of
PROG
setting, and the display
of the device will flash the time value (the default setting is
) to be set.
To set switchings
PROG
—
PROG
(in the same was as
PROG
has
been set) repeat steps “
d
” – “
e
”.
If you do not intend to activate further switching options for the day(s)
selected in addition to those that have already been set then touch the
button, without resetting the start date of the next offered switching from
the default
position.
Then programming of the respective day(s) is
completed and the device immediately offers selection of a new day and
programming can be continued from step.“
b
”.
If you have set all switchings from
PROG
to
PROG
for the selected
day(s) then, after the temperature/humidity of switching
PROG
has been set, programming the respective day(s) is finished and the
device immediately offers selection of a new day and programming can
be continued from step “
b
”.
g)
You can save and finish programming by touching the
button
. The
device will automatically acknowledge settings even if no button is touched
