- 17 -
7.1. Selecting the operating mode (FUNC)
You can easily switch between heating (
HEA
; factory default setting),
cooling (
COO
), humidifying (
HUM
) and dehumidifying (
DEH
) modes. The
connection points of the output relay of the receiver unit
1
(NO) and
2
(COM) close
at temperatures below those set in the heating mode, at
temperatures above those set in the cooling mode, below the humidity
level set in the humidifying mode and above the humidity level set in
the dehumidifying mode
(taking the switching sensitivities into account).
7.2. Switching on and off of the programmed mode (PROGRAM)
The thermostat can be used in both programmed and non-programmed
modes. When the programmed mode is on, in automatic (programmed)
mode the thermostat controls the devices connected thereto according to
the pre-set program, but it can be switched to manual mode by touching the
button, and in this case it will constantly control the devices according to
the temperature/humidity set manually, regardless of the pre-set program.
When you switch off the programmed mode, you can set two independent
