QA402 User Manual
10
Plugging in your Hardware
The QA40x application requires you to specify the hardware model you are connecting. In the lower left of the
application, you will see a message indicating which hardware is expected. You can change that in the File->
Device menu option.
When you have correctly set your device and plugged the device in, you will see a status confirmation as shown
in the lower left corner:
After the device has been connected, you can begin making a measurement by pressing the RUN button in the
Run/Stop control group.
Button and Control Panel Operation
The buttons in the control panel on the left side of the screen are large enough to be easily pressed with a
finger if you are using a touch screen. The control panel can be scrolled up and down with the mouse wheel. If
you are using a trackpad, there is usually a trackpad shortcut for mouse wheel operation. Usually this is a two-
finger drag across the trackpad.