QUANTA QSSC-980 User Manual Download Page 85

Page: 85 / 138

錯誤

尚未定義樣式。

— Using the ESMS

ADS Configuration

The ADS Configuration web page enables the administrator to configure an Active Directory Server (ADS).

Figure 29 – User Management ADS Configuration

ADS Configuration requires a Domain Name Server (DNS), an Active Directory Server (ADS), a Certificate Au-
thority Server (CAS), and an AD certificate.

In the ADS Configuration page, enter the file path of the CA certificate or browse to the location.

Click Browse to upload the Certificate exported from the AD server.

Enter Primary DNS (Domain Name Server IP) and Root Domain (AD server Domain).

In the Clock Settings page, ensure BMC shows the same time as the AD Server.

Click Submit.

Log off, and log in to the Web GUI with the username and password you set in AD server.

Summary of Contents for QSSC-980











































































































































Search results

Summary of Contents for QSSC-980

Reviews:

Related manuals for QSSC-980

Brands by name

Popular brands

QUANTA QSSC-980, User Manual

Search results

Summary of Contents for QSSC-980

Reviews:

Related manuals for QSSC-980

Brands by name

Popular brands