QUANTA D51B-2U User Manual Download Page 43

Page: 43 / 65

XIT

CREEN

BIOS

2-14

Restore User Default Values is selected, the system is restored to the default values that
the user saved earlier, instead of being restored to the factory defaults.

Figure 2-7.

Exit Screen

Table 9: Exit Screen Description

ETUP

TEM

PTIONS

ELP

EXT

OMMENTS

Discard Changes
and Exit

Exit system setup without saving
any changes.

Save Changes
and Reset

Reset the system after saving the
changes.

Discard Changes

Discards changes done so far to
any of the setup options.

Restore Defaults

Restore/Load Default values for
all the setup options.

Save as User
Defaults

Save the changes done so far as
User Defaults.

Restore User
Defaults

Restore the User Defaults to all
the setup options.

[<Device String
1>]

Boot with Device <Device String
1>

[<Device String
2>]

Boot with Device <Device String
2>

[<Device String
3>]

Boot with Device <Device String
3>

[<Device String
4>]

Boot with Device <Device String
4>

[<Device String
5>]

Boot with Device <Device String
5>

Summary of Contents for D51B-2U


































































Search results

Summary of Contents for D51B-2U

Reviews:

Related manuals for D51B-2U

Brands by name

Popular brands

QUANTA D51B-2U, User Manual

Search results

Summary of Contents for D51B-2U

Reviews:

Related manuals for D51B-2U

Brands by name

Popular brands