Quanta Computer Inc.
http://www.quantatw.com/
9.
You can start to use the utility, “Quanta
WCM” to setup and configure the WiMAX
subscriber (WCM).
After finished Quanta WCM installation, if Quanta WiMAX card was inserted and power on, you can
double click the “QuantaWCM” icon to lunch the WCM . Before first running the WCM, it’s necessary to
configure firmware configuration file, such that it could make it effect on your system.
You can double click the “Quanta Configuration File Editor” icon to modify the related parameters, such
as bandwidth, center frequency. Once you lunch the Quanta WCM, it will automatically connect to BS with
strongest signal and provide you service.
Please, refer to chapter 6.2 to get detail information about the
configuration file parameters
.
5.
Configure the WiMAX Card by Quanta WiMAX Connection
Manager
5.1.
Use Quanta WiMAX Connection Manager to setup WiMAX
connection without security configuration
1.
Please, double click the “QuantaWCM”
icon to lunch the WCM.
Page 13