Quanta Computer WiMAX WC510, User Manual, Page: 31 / 39

Quanta Computer Inc.
http://www.quantatw.com/
3. Please, open the
“
C:\WINDOWS\system32\drivers\
macxvi.cfg ” configuration file and click
“Open” button.
4. You can modify the configuration
parameters after you load macxvi.cfg
finished.
5. Please, refer to next chapter that descript
configuration parameters what you can
modify.
6. Please, click the “File” and select “Save” or
“Save as” to save your modified.
6.2. Configuration File Parameters
The following table shows configuration parameters as found in Config File Version 17. You can use
“ Quanta Config File Editor ” utility to edit the “ C:\WINDOWS\system32\drivers\ macxvi.cfg ”
configuration file.
Parameter Description Comment
Configuration File Version This parameter is changed whenever a
parameter is added or dropped. In other words
this defines the config file template version. A configuration file is
matched to a specific
firmware release.
Center Frequency 0: Enable scanning
Non Zero: specific center frequency in MHz. Example: Center Frequency
= 2545.75 (should be a
multiple of 0.25 MHz)
Page 31