Quanshun Communication Technology Co., Ltd
Add: Quanshun Bldg., Daxiamei, Nan'an, Quanzhou, Fujian, China 362302
Tel: 86 595 86753355 Fax: 86 595 86758299
During Scanning, Answer Calling
Stop at the detected active channel/contact list.
Radio keeps at this stop channel that is so called “Free Time” programmed period.
1.
Keep the radio 1-2feet (2.5-5cm) away from mouth.
If the radio program the “Free Channel Indication”, release PTT to get a short
tone, that means it is free channel and wait for your answer.
2.
Within the permitted period, Press PTT to call, LED light red.
3.
Talk to microphone after active the tone of allowing calling tone.
4.
Release PTT to receive information.
5.
Radio automatically over the calling if there is no operation with permitted
period.
Settings
SQL
You can adjust the SQL to filter lower signal calling or channels with background
noise is higher than normal value.
Normal: default value.
High: filter no use calling or background noise, but may also filter the calling from
long distance.
1. Program the SQL key.
2. A positive tone means high SQL; a negative tone means normal SQL.
High/Low Power
High power enables communication with long distance radio. Low power enables
communication with short distance radio.
1. Program High/Low power key.
2. A positive tone means radio transmit at the low power; A negative tone means
radio transmit at the high power.
VOX
This function enables your radio to make a call with a programmed channel. No
matter when the accessories with VOX function detect the signal, radio will transmit
the information within programmed period.
Press PTT to disable VOX function.
Operate follow step to re-start the VOX:
Turn off the radio and power on again. Or rotate channel switch to another one. Or
operate the below.
NOTE: Enable or disable this function to those active radios.
1. Program the key with VOX function and can turn on/off.
2. Talk to microphone after active the tone of allowing tone.
