Chapter 3
20
QDSN-2600 User’s Manual
Chapter 2
Assembly/Disassembly
Accessing Internal Components
WARNING
Before opening your system, make sure to turn it off and disconnect the power
sources to prevent electric shock or system damage. And wait 3 to 5 minutes to let the
system cool before removing the system cover.
Follow the procedure described below to access the system's internal components.
1) Place the system front-side-down on a soft material to prevent marking or
scratching of the front panel. Remove the screws securing the rear panel of the
chassis as shown. (4x flathead screws from top and bottom side, 3x flathead
screws from right/left side and 7x flathead screws from chassis cover)
Figure 5 Removing the rear cover
