- 9 -
V080422
Installation
Environmental state
Operating temperature:
5℃ ~ 40℃ (Fahrenheit : 41℉ ~ 104℉)
Humidity: max. 85%
Power Input
Power Cord
AC Power cord
This power cord is used to connect the side controls of the LCD monitor and the wall outlet.
Connect the power cord into main power of the monitor, and “
│
” is power on, “
○
”
is power off.
Electrical Input: 100-240V~ 3A 50/60Hz
y
Connect the power cord that comes with your LCD Monitor to the power socket on the right hand side of
LCD Monitor. Then, connect the plug of the power cord to a power source.
y
Press the power switch (0: Off, 1: On) to turn the LCD Monitor on. When the orange indicate lights on,
your LCD Monitor is in the standby mode.
y
When using IPC device, need to connect the power cord of the adapter that comes with your IPC to the
AC outlet by the side of the AC socket.
Power Interface
Main interface- switch & AC socket. Please see the chapter “
Power input
”
The side controller of the monitor
The remote control (RCU )
Connect to wall outlet
Main power –Switch &
AC socket
Single Input Interface
│
is power on
○
is power off
AC outlet is to connect
optical Industrial PC
The bottom of control
