Chapter 1
17
QTM-1500/1700/1900 User’s Manual
System Tour
Refer to the diagrams below to identify the components of the system.
I/Os
Figure 1 I/Os
USB2.0
This USB (Universal Serial Bus) 2.0 port is for touch functionality only. It works
only in case of no OPS module inserted into the MoniQ Series. It doesn't work
either even though the screen is switched to "Monitor" mode but with an OPS
module in the MoniQ Series.
DC Jack
The supplied power adapter converts AC power to DC for use with this jack.
Power supplied through this jack supplies power to the PC. To prevent damage
to the PC, always use the supplied power adapter.
HDMI
HDMI connector for display output
DVI-D
DVI-D is an acronym which means Digital Video Interface Digital. Essentially it
is a cable that connects two devices producing an output image on a screen.
VGA
D-Sub 15 pin VGA connector for display output
Line-Out (Green)
The stereo headphone jack is used to connect the system’s audio out signal to
amplified speakers or headphones.
