Quanmax KUBE-8110, User Manual

Page: 63 / 66

Internal Connectors and Jumpers 5-11 KUBE-8110 User’s Guide
X
Floppy Connector (FDD1: FPC-26 1.0mm pitch):
PIN SIGNAL PIN SIGNAL
1 +5V 2 #INDEX
3 +5V 4 #DRIVE SELECT A(#DSA)
5 +5V 6 #DISK CHANGE(#DSKCHG)
7 N.C 8 N.C
9
N.C 10 #MOTOR A On(#MOA)
11 N.C 12 DIRECTION SELECT(#DIR)
13 #DRIVE DENSITY SEL(#DS0) 14 #STEP
15 GND 16 #WRITE DATA(#WD)
17 GND 18 #WRITE GATE(#WE)
19 GND 20 #TRACK0
21 GND 22 #WRITE PROTECT(#WP)
23 GND 24 #READ DATA(#RDATA)
25 GND 26 #SIDE ONE SELECT(#HEAD)
Table 5-23. Floppy Connector pin definition
X
Front Panel 1 Header(FP1: 4x2-pin 2.54mm pitch):
PIN SIGNAL PIN SIGNAL
1
Reset Switch (+)
2
External Speaker (+)
3
Reset Switch (-)
4
NC
5
IDE LED (+)
6
Internal Speaker
7
IDE LED (-)
8
External Speaker (-)
Pins 2, 8: External Speaker wire
Pins 6-8 shorted: Internal Speaker Enable (default)
Table 5-24. Front Panel 1 Header pin definition
X
Front Panel 2Header (FP2: 5x2-pin 2.54mm pitch):
PIN SIGNAL PIN SIGNAL
1 Power LED (+) 2 Power On Button (+)
3 NC 4 Power On Button (-)
5 Power LED (-) 6 NC
7 KeyBoard Lock (+) 8 I2C Bus SMB Data
9 GND 10 I2C Bus SMB Clock
Table 5-25. Front Panel 2 Header pin definition