Chapter 3
28
KPC-1530/ 1730 User’s Manual
3. Remove just enough insulator material from the ends of the wires to allow a
proper electrical connection to the terminal block.
4. Insert the power feed wires into the terminal block and tighten the compression
clamps as shown.
5. Insert the terminal block into the DC inlet in the chassis and secure by tightening
the screws loosened in Step 2.
6. Connect the power distribution to the DC power feed wires.
7. Press the power button to turn it on.
Operating System and Drivers
If your product does not come with an operating system pre-installed, you will need
to install an operating system and the necessary drivers to operate it. After you have
finished assembling your system and connected the appropriate power source,
power it up using the power supply and install the desired operating system.
You can download the drivers for the product from the Quanmax website
at
www.quanmax.com
and install as instructed there. For other operating systems,
please contact Quanmax.
