Carriage Cable Clamp
Mounting Screws
Figure 7-4 The TLS-4000 Carriage Assembly – Top View
8.
Lay the TLS on its left side (as seen from the front) to gain access to the bottom
Leadscrew retaining screw (Figure 7-5).
Cabinet Foot
Leadscrew
Retaining
Screw
Figure 7-5 The TLS Cabinet – Bottom View
9.
Use a 1/8-inch Allen wrench to remove the Leadscrew retaining screw
(Figure 7-5), then stand the TLS upright on its feet.
NOTE
The Teflon
®
coating on the Leadscrew is easily scratched. Please handle the Leadscrew with
care. The Leadscrew and Spring Cup Assembly will be removed as a subassembly (Figure 7-3).
7-8
Field–Replaceable Units (FRUs)
501380 Rev. B
