R
Q40 Quick Start Guide
511036 Rev 01
5
Power on the Library
Power on the library by pressing the power button on the Base
Module just below the OCP; the green light will illuminate. When
the library is powered on, it inventories the tape cartridges in the
magazines, checks the firmware version on all modules,
configures the tape drives, confirms the presence of the existing
modules, and searches for any new modules.
Start the Initial Configuration Wizard from the OCP. The wizard
will guide you through configuring the basic network
configuration, date and time, and setting the administrator PIN.
You can skip items and stop the wizard at any time. Once you
have configured the network settings, we recommend that you
initiate the wizard from the RMI to complete the configuration.
For Login to the RMI use the default Administrator Password
“adm001”
For more detailed instructions and information on your Q40
Library system, please refer to the Q40 Installation and
Operations manual.
The manual is available online at:
https://www.qualstar.com/qsr-manuals/Q40-Install-
and-Ops-Manual.pdf
Qualstar Corporation
130 W. Cochran
Street; Suite C
Simi Valley, CA 93065
Produced in the United Stated of America
August 2018
This document is current as of the initial date of publication and
may be changed by Qualstar at any time.
THE INFORMATION IN THIS DOCUMENT IS
PROVIDED “AS IS” WITHOUT ANY WARRANTY,
EXPRESS OR IMPLIED, INCLUDING WITHOUT
ANY WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND ANY
WARRANTY OR CONDITION OF
NON-INFRINGEMENT.
Qualstar products are warranted according to the terms and
conditions of the agreements under which they are provided.
Please Recycle
Technical Support
Monday – Friday
7:00AM – 4:00PM PST
Telephone:
877-444-1744 (USA)
805-583-7744 (International)
Email:
Website:
