Qualstar Q40 Quick Start Manual Download Page 2

Page: 2 / 5

Q40 Quick Start Guide

511036 Rev 01

Removal of Insertion Foam

The Q40 robotics is protected during shipment by an
insertion foam which must be removed prior to
installation of the library.

Remove the top cover plate from the Base Module by
using a small screwdriver to unlock the top cover.

Lift the cover and pull forward to disengage the cover
from the pivot point at the center of the module.

Remove the insertion foam.

Preparing Top/Bottom Modules

Skip this section if you are only installing a Base Module

If you are adding an Expansion Module above the Base,

you must move the top cover plate from the Base to the

Expansion. If you are adding an Expansion Module

below the Base, you must move the bottom cover plate

from the Base to the Expansion.

Moving the Top Cover Plate

Remove the top cover plate from the Base Module by

using a small screwdriver to unlock the top cover.

Lift the cover and pull forward to disengage the cover

from the pivot point at the center of the module.

Install the top cover on the Expansion Module.

Summary of Contents for Q40





