4
MAiNtENANcE
WARNINg: dIscONNecT POWeR ANd uNPlug The POWeR cORd BefORe
ATTeMPTINg ANy MAINTeNANce OR cleANINg TO Reduce The RIsK Of fIRe,
elecTRIc shOcK OR dAMAge TO PeRsONs. The BulBs IN yOuR uNIT cAN BecOMe
exTReMely hOT. AllOW AT leAsT 10 MINuTes BeTWeeN TuRNINg Off The uNIT
ANd ReMOvINg The lIghT BulBs TO AvOId The AccIdeNTAl BuRNINg Of The
sKIN.
RIsK Of fIRe: dO NOT exceed The RecOMMeNded BulB WATTAge.
rEPlAciNG tHE liGHt BUlBS
Step 1: The light bulb compartment is located at the bottom of fireplace as shown in Fig. F.
Remove 2 screws to open cover.
Fig. F
Step 2: you will find 1 X 40W Type B-10 bulb under log-set bed. See Fig. g.
Fig. G
Step 3: Loosen and remove the burnt out bulb and replace with new bulb.
See Fig. h.
Fig. H
Step 4: close the cover and secure the 2 screws.
Step 5: Plug in the unit.
clEANiNG
To clean the unit first turn off the controls on the unit and unplug the unit from power source. To
clean the glass display panel; remove dust with clean dry cloth. Remove finger prints and other
marks with clean damp cloth. Do not use abrasive cleaners or spray liquids on glass display
panel surface. Metal and metal painted parts should be cleaned with a damp cloth. Do not use
abrasive cleaners or spray liquids on these surfaces.