Reprogramming LCRU Circuit Boards To Restore Features
Due to the inevitable derailments, static and the nature of electricity, it is possible that your LCRU could someday lose its setup program.
The symptoms of this condition would be unresponsiveness in command mode. This can easily be remedied by "reprogramming" your LCRU using
the following steps.
Step 1: Move switch on locomotive from RUN to PROGRAM.
Step 2: Turn on Command Base.
Step 3: Place locomotive on track, then turn on power to track.
Step 4: Press ENG, then input locomotive ID#. Press SET.
Step 5: Press ENG, then the ID#, AUX1 then press 43.
Step 6: Turn off power to track, wait ten seconds.
Step 7: Remove locomotive from track, move switch from PROGRAM to RUN.
Step 8: Place locomotive back on track, turn power on to the track.
Step 9: Press ENG and ID#, then operate normally.
Service And Warranty Information
This item is warranted for one year from the date of purchase. We will repair or replace (at our option) the defective part without charge for
parts or labor, if the item is returned in the manner listed below within one year of the original date of purchase. This warranty does not cover items
that have been abused or damaged by careless handling. Transportation costs incurred by the customer are not covered under this warranty.
For warranty repair, DO NOT return your product to the place of purchase. Instead, follow the instructions below to obtain warranty
service as our dealer network is not prepared to service the product under the terms of this warranty.
1. First: WRITE, CALL or FAX Weaver Models, PO Box 231, 315 Point Township Drive, Northumberland, PA 17857, 570-473-9434 (FAX
#570-473-3293), requesting a Return Authorization Number and stating when the unit was purchased and a description of the problem.
2.
CAUTION:
Make sure the product is packed in its original factory packaging including its foam and plastic wrapping material so as to
prevent damage during shipping. The shipment must be prepaid and we recommend that it be insured.
A cover letter, including you name,
address, daytime phone number and a full description of the problem MUST be included to facilitate the repairs. Please include the
description regardless of whether you discussed the problem with one of our service technicians when contacting Weaver Models.
3. Please make sure you have followed the instructions carefully before returning any merchandise for service.
Page 5
Lionel®, RailSounds™, CAB-1 Remote Controller®, Powermaster®, TowerCom™, CrewTalk™, and TrainMaster® Command Control are registered trademarks of
and licensed by Lionel LLC.
