6
fig. E
Step 6: Carefully place the INSERT into the
unit opening. The front of INSERT should
be flush with the front of the mantel. Once
the INSERT is in place, attach 2 MOUNTING
BRACKETS [V] with 2 KD SCREWS onto the
bottom of insert. (1 screw for each bracket)
See Fig. F.
fig. F
Step 7: Attach the UPPER FRONT PANEL [E]
over the upper section of 2 FRONT PANELS
[D] with 6 KD SCREWS. (3 screw for each
side) See Fig. G.
fig. G
Step 8: Attach 3 MOUNTING CLIPS [U] onto
the top of INSERT and lock in place with 3
SHORT KD SCREWS [T]. See Fig. H.
fig. H
Step 9: Install the TOP PANEL [A] to the unit
as shown and attach with 3 KD SCREWS.
See Fig. I.
A S S E M B LY I N S T R U C T I O N S
