4
A 15 AMP circuit is required to operate this
heater. If the breaker trips when the heater
is used then you may need to move the
heater to another location or unplug other
appliances that are on the same circuit. If
you require an extension cord use one that
is rated at 1875 watts.
SAVE THESE
INSTRUCTIONS
FOR FUTURE USE.
PARTS LIST:
Fireplace insert
1
A) Top panel
1
B) Base panel
1
C) Side panel
2
D) Front panel
2
E) Upper front panel
1
F) Lower front panel
1
S) Connector
2
T) Short KD screws
3
U) Mounting clips
3
V) Mounting brackets
2
W) KD screws
51
X) Plastic connector
13
Y) SELF REPAIR SET
Touch-up repair paint (bottle)
L shape bracket
8
Screws for L shape
32
Plastic Connector
1
KD Screws
3
KD Nuts
3
Z) WALL ANCHOR SAFETY CABLE
Wall Anchor
1
Screw for wall anchor
1
Screw for mantle
1
Safety cable
1
TOOL REQUIRED: PHILLIPS HEAD SCREWDRIVER
MANTEL AND
INSERT ASSEMBLY:
WARNING: Make sure the fireplace INSERT
controls are in the OFF position and the
INSERT is NOT plugged in.
CAUTION: Place a piece of cardboard or
protective sheet on the floor in order to avoid
scratching the decorative surface of your
mantel during assembly.
S A F E T Y I N S T R U C T I O N S
