background image

3

S A F E T Y   W A R N I N G S   &   C A U T I O N S

SYMBOL AFFIXED TO MACHINE

EXTENSION CORDS

Improper use of extension cords may cause inefficient operation of the log splitter which 

can result in overheating. Be sure extension cord is approved for this application. See 

specifications. 
Avoid use of free and inadequately insulated connections. Connections must be made with 

protected material suitable for outdoor use.

AvOID ELECTRICAL SHOCK

Check  that  the  electric  circuit  is  adequately  protected  and  that  it  corresponds  with  the 

power, voltage and frequency of the motor. Check that there is a ground connection and a 

regulation differential switch upstream.
Prevent  body  contact  with  grounded  surfaces:  pipes,  radiators,  ranges,  and  refrigerator 

enclosures.
Never open the pushbutton box on the motor. Should this be necessary, contact a qualified 

electrician.
Make sure your fingers do not touch the plug’s metal prongs when plugging or unplugging 

the log splitter.

 

KEEP vISITORS AND CHILDREN AWAY

The log splitter must always be operated by one person only. Other people should keep 

a safe distance from the work area, especially when the log splitter is in operation. Never 

have another person help you with freeing a jammed log.

INSPECT LOG

Make sure there are no nails or foreign objects in logs to be split. The ends of the logs 

must be cut square. Branches must be cut off flush with the trunk.

DO NOT OvERREACH

Floor must not be slippery.  Keep proper footing and balance at all times.

Never stand on log splitter. Serious injury could occur if the tool is tipped or if the cutting 

tool is unintentionally contacted. Do not store items above or near the log splitter where 

anyone might use the log splitter to stand on in order to reach the items.

AvOID INJURY FROM UNEXPECTED ACCIDENT

Always pay full attention to the movement of the log pusher.  Do not attempt to load the 

log on until the log pusher has stopped.  Keep hands out of the way of all moving parts.

PROTECT YOUR HANDS

Keep your hands away from splits and cracks which open in the log, as they may close  

suddenly and can cause severe injury.  Do not remove jammed logs with your hands. 

DO NOT FORCE THE TOOL

Never try to split logs larger than those indicated in the specifications table. This could be 

dangerous and may damage the machine.  Do not use log splitter for purposes in which it 

was not intended.

NEvER LEAvE TOOL RUNNING UNATTENDED

Don’t leave tool until it has come to a complete stop and unplugged.

DISCONNECT POWER

Unplug when not in use, before making adjustments, changing parts, cleaning, or working 

on the log splitter. Consult technical manual before servicing.

Summary of Contents for LS5T-H



































Reviews: