SETTING UP THE GEN 5 IN QTM
7
4.
In the settings window, specify the camera number to which your amplifier is
connected by using the dropdown menu beside “Sync source.” (The number is
displayed in the bottom right-hand corner on the front of the camera.)
5.
It is recommended to zero your force plate(s) before each trial, and you can
automate this by selecting one or both of the checkboxes under “Force plate
auto-zero.”
6.
Click “OK” to save your settings.
Setting the calibration parameters
If you are using a digital force plate, QTM will receive the calibration matrix
automatically from the amplifier. However, if you are using an analog force plate, you
can set the calibration parameters manually.
