background image

5.  WHAT IS NOT COVERED UNDER THIS WARRANTY:

A.

Implied warranties, including those of merchantability and FITNESS

for a particular purpose are limited in duration to this express
warranty. After this period, all risks of loss, from whatever reason,
shall be on the purchaser.

B.

ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS,

DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY
DEFECT, FAILURE OR MALFUNCTION OF THIS PRODUCT.

C.

This warranty does not apply to any accessory or consumable

items included with the product which are subject to wear from
usage; the repair or replacement of these items shall be at the
expense of the owner. These items include, but are not limited
to: bar, chain, spanners, bucking spikes, etc. In addition, this
warranty does not extend to any damage caused by the untimely
replacement or maintenance of any of the previously listed
CONSUMABLE parts.

D. 

Any failure that results from accident, purchaser’s abuse, neglect

or failure to operate products in accordance with instructions
provided in the owner’s manual(s) supplied with the product.

E.

Pre-delivery service, i.e. assembly and adjustment.

6.  RESPONSIBILITIES OF WARRANTOR UNDER THIS

WARRANTY:

  Repair or replace, at Warrantor’s option, products

or components which have failed within duration of the warranty
period.

7.  RESPONSIBILITIES OF PURCHASER UNDER THIS

WARRANTY:

A.

  Please call your re-seller or the number listed above for warranty

assistance.

B. 

Provide dated proof of purchase and maintenance records.

C. 

All generators must be delivered or shipped to the nearest Service

Agent or re-seller. Freight costs, if any, must be borne by the
purchaser.

D.

  Use reasonable care in the operation and maintenance of the

products as described in the owner’s manual(s).

E.

  No warranty costs incurred will be considered for, or covered if

Euroquip has not been contacted and prior permission for repair
/ replacement has been granted.

8.  WHEN WARRANTOR WILL PERFORM REPAIR OR

REPLACEMENT UNDER THIS WARRANTY:

Repair or replacement will be scheduled and serviced according

to the normal work flow at the servicing location and depending
on the availability of replacement parts.

Whilst every effort is made to ensure your complete
satisfaction with this tool, occasionally, due to the mass
manufacturing techniques, a tool may not live up to our
required level of performance and you may need the
assistance of our service department.

This product is warranted for a 12 month period for home
domestic use from the date of the original purchase. If found
to be defective in materials or workmanship, the tool or the
offending faulty component will be replaced free of charge
with another of the same item. A small freight charge may
apply. Proof of purchase is essential.

We reserve the right to reject any claim where the purchase
cannot be verified.This warranty does not include damage
or defects to the tool caused by or resulting from abuse,
accidents, alterations or commercial or business use. It also
does not cover any bonus items or included accessories.
Only the chainsaw is covered under this warranty.

Please ensure that you store your receipt in a safe place.
Conditions apply to the above warranty.

1. DURATION:

 The manufacturer warrants that it will repair or

replace, at no charge for parts or labour, the QUALCUT Chainsaw,
if proven defective in material or workmanship, during the following
time period(s) after date of original retail purchase:

For 1 Year:

The QUALCUT Chainsaw (excluding accessories)

2. WHO GIVES THIS WARRANTY (Warrantor):

EUROQUIP
109 Bolt Road
Stoke, Nelson
New Zealand 7011
Service Line  ++64 3 547 8409

3.  WHO RECEIVES THIS WARRANTY (Purchaser):

The original purchaser of this QUALCUT Chainsaw.

4.  WHAT IS COVERED UNDER THIS WARRANTY:

Defects in material and workmanship which occur within the
duration of the warranty period.

POWER PRODUCTS LLC.

CS4600

QUALCUT CS4200
46CC 18” CHAINSAW

WARRANTY

25.

Summary of Contents for CS4600 Garden Master Series





























Reviews: